Avery Weigh-Tronix FLI 225, Service Manual

Page: 30 / 110

30 FLSC 05 w/FLI 225 Instrument Service Manual
2. Press the Up or Down Arrow softkey as necessary to highlight the entry you
wish to see.
3. Press the Enter softkey.
The details for that entry are displayed.
Figure 7.10 Sample Error Log Record
4. Press the Esc or Enter softkey to return to the Error Log Viewer .
5. Press the Esc softkey to the Diagnostics Manager module.
The following errors may be logged if enabled.
Table 7.1 Error Codes and Definitions
Error Definition
UNDERLOAD ERROR The weight on the carriage has gone below the set negative% of capacity.
OVERLOAD ERROR The weight on the carriage has gone above the set positive% of capacity.
DRIFT ERROR Zero Tracking has removed an accumulated weight beyond the set% (positive or negative) of
capacity.
FLJ COMM ERROR Communication with the FLJ 100 or FLW 100 has been lost.
FLJ CHANGE ERROR An FLJ 100, FLW 100 or FLI 225 instrument has been changed.
FLJ CORNER ERROR Stored corner coefficients do not match between FLI 225 and FLJ 100 or FLW 100
FLJ ANGLE ERROR Stored angle coefficients do not match between FLI 225 and FLJ 100 or FLW 100.