![background image](http://html.mh-extra.com/html/avery-dennison/adtp1-monarchnet2/adtp1-monarchnet2_operating-instructions-manual_3030311007.webp)
Using a Web Browser2-1
U S I N G A W E B B R O W S E R
You can configure and manage the printer using a W eb browser. The recommended minimum
screen resolution for your computer is 1024 x 768 pixels. Before you begin, you need to know your
printer’s IP address. The printer should be turned on and ready to receive data.
Note:
The screens shown in this manual may not exactly match what you see.
It may take about a minute, depending on network traffic, for the printer to connect to an access
point. W hen the printer is connected and ready to receive data you see:
The printer’s display shows the antenna symbol when the printer is connected and ready to receive
data.
L o g g i n g I n
1.
Start your W eb browser.
2.
Type in your printer’s IP address and press
Enter
. For example, 192.0.0.192.
If the printer is experiencing a ribbon or supply problem, the icon for Printer Status appears
with a red background.
If the printer has a wireless connection, the signal strength icon appears.
The power status shows AC or DC (using a Mobile W ork Station) depending on your
connection.
3.
Click
Log In
or the printer’s name (for example: PXR8A983A).
2
Summary of Contents for ADTP1 MonarchNet2
