Console Commands
3-1
C O N S O L E C O M M A N D S
Use this chapter to configure the W ireless module using Telnet. You must have a basic
understanding of the Telnet application. For initial setup, do not use Telnet, use auto-discover
mode. Once you have the IP address, you can use Telnet or a Web browser.
RSH (remote shell) support is available. Remote shell support is a common UNIX
application that
provides remote command execution capability for networked devices. For more information, refer
to your UNIX documentation.
♦
You can use Telnet if you do not have access to the MonarchNet2 software.
♦
This chapter also includes information about the Network Packet (Console Passthru).
Note:
The default port is Port 23.
C o n v en t i o n s
This section uses the following conventions:
KEYwords
Type the capitalized letters of each keyword instead of the whole keyword. Some
keywords require more capitalized letters than others. For example,
SEt
KEYVAL
RAdio
[options]
Mutually-exclusive options are included within square brackets and separated by
a forward slash. Select only ONE of the options. For example,
[DISable/STRICT/FLEXible]
<values>
Values are included within brackets. Values that contain spaces (multiple words)
must be enclosed within quotation marks (""). For example,
SEt EN PW <value>
SEt EN PW "Store 876"
n
Numeric digits are indicated by the letter (n).
For example,
SEt IP BOot n
SEt IP BOot 5
SEt EN CHannelnn
SEt EN CHannel 11
A c c e s si n g T el n et Co n so l e M o d e
1.
Start a Telnet session.
2.
Type telnet [your printer’s IP address] (for example,
192.0.0.192
)then press
Enter
.
3.
You see “W elcome to MonarchNet2 Enter Password:”
Type
access
as the password then press
Enter
(
access
is the default password.).
The password is case-sensitive. You may not be prompted for a username.
Note:
The Telnet session times out after 10 minutes of inactivity.
3
Summary of Contents for ADTP1 MonarchNet2
