3-8
MonarchNet2 Operating Instructions
S N M P Co m ma n d s
CLear SNMP CONtact<string>
Rem oves SNMP SysContact.
CLear SNMP LOCation<string>
Rem oves SNMP SysLocation.
SET SNMP GETCOMM <string>
Gets SNMP comm unit y.
SET SNMP SETCOMM1 <string> or SET SNMP SETCOMM2 <string>
Sets SNMP comm unit y 1 or comm unit y 2 nam e.
Note:
An incom ing set request can use either nam e f or comm 1 or com m 2.
SET SNMP CONtact<string>
Sets SNMP SysContact.
SET SNMP LOCation<string>
Sets SNMP SysLocation.
U s i n g t h e N et w o r k P a c k e t
Use the Network Packet to send console commands directly to the network card via the printer’s
serial port. If the network card does not appear to be communicating with the printer, you can use
the Network Packet to change the SSID, IP address, etc. of the network card.
Note:
You can use Network Packet even if MonarchNet2 is disabled or not installed. Printer
console commands are available but network console commands are not.
Syntax
{N,number,action,device,”name”¦
C,”con_cmds”¦}
N1. N
Network Console Packet.
N2. number
Number from 0-999 to identify the network console packet.
N3. action
Enter
A
to add to packet to the printer.
N4. device
Enter
T
to pass the packet through the printer and stores the packet in the network card.
N5. “name”
Packet name, 0-8 characters, enclose within quotation marks.
C1. C
Command field.
C2. “con_comds”
Console commands. Must be enclosed within quotation marks. Each command must be
on a separate line. The maximum number of characters per command is 100. See the list
of commands earlier in this chapter for more information.
Note :
The ma ximum number of commands per packet is twent y- five (25 ).
Example
{N,1,A,T,”mystore”¦
C, ”set ip me static”¦
C, ”init” ¦
C, ”exit” ¦}
Sends the Network Packet
1
“
my store
” directly to the network card (
T
) and
set
s the
IPme
thod to
static
for determining IP addresses. Init and Exit commands must be used to save changes and
initialize the network card.
Summary of Contents for ADTP1 MonarchNet2
