Console Commands
3-7
R F I D Co mm an d s
SHow PRN RFId {MOduletype/ VErsion/ WRiteattempts/ PRotocol/ RPower/ WPower/
REgion/ FRequency/ SUmmary}
Shows the specified RFID param eter’s current setting. If no param eter is specified, it shows the current
settings of all param eters in the RFID categor y.
CLear PRN RFIdSUmmary
Clears RFID summ ary data (num ber of good and bad RFID tags).
8 0 2 . 1 1b / g W i re l es s Co mm an d s
In the following commands, EN and NW (network settings) are interchangeable.
CLear EN SSid
Clears the SSID, so the server connects to an y access point.
SET EN AUTHtype [OPEN/SHARED/TTLS/LEAP/PEAP/WPA-PSK]
Sets the authentication type. See Chapter 3, “Using the W eb Browser” for m ore inform ation.
SET EN ENC [DISable/64/128/WPA/WPA2/WPA2-WPA/
Dynamic WEP]
Sets the encr yption m ode. See Chapter 3, “Using the W eb Browser” for m ore i nform ation.
SET EN INAP [PAP/MSCHAP_V2]
Sets the EAP inner authentication protocol.
SET EN KEY# <1/2/3/4>
Sets which W EP key num ber to use (default is 1).
SET EN KEYVAL <WEPkey>
Sets W EP key value.Must be hexadecim al.
SET EN MODE [IN/AD]
Sets 802.11b/g/n wireless m ode to infrastructure or Ad- Hoc m ode.
SET EN ROAm
Sets the Roam Threshold.
SET EN SSID “<ssid>”
Sets 802.11b/g/n wireless SSID. Use quotes if there is a space in SSID. This is case sensitive.
SET EN WPAPSK <WPAkey>
Sets the W PA pre-shared key or pass-phrase. Use 64 hex characters for the PSK or 8- 63 characters for the
pass-phrase. This is only valid when authentication m ode is W PA-PSK.
T CP / I P Co m m an d s
SET IP ADdress
Sets IP address of wireless m odule.
SET IP BOot n
Sets num ber of retries (n) for DHCP, BOOTP, RARP
SET IP KEepalive n
Sets keep alive interval (n) in m inutes.
SET IP MEthod [DHCP/STATIC]
Sets m ethod of getting IP address.
SET IP SUBnet aa.bb.cc.dd
Sets default subnet m ask.
SET IP TImeout n
Sets tim eout (n) in m inutes.
Summary of Contents for ADTP1 MonarchNet2
