Using a Web Browser2-5
C o n f i g u ri n g t h e N e t w o r k S et t i n g s
You can configure the printer to operate on your network.
1.
From the side Menu Bar, click
Network Configuration
.
2.
Select one of the following tabs: Protocols, SNMP, W ireless, or Alerts.
Changing TCP/IP Settings
Only configure the settings required for your network/printer.
1.
On the
Protocols
tab, set the
Boot Method
: Auto, DHCP, or Static.
2.
Set the number of
Boot Tries
: 1-10. The default is 3. If you are having a problem receiving an
IP address with BOOTP, set this number to 10.
3.
Change the
IP Address
if necessary.
4.
Set or change the
Subnet Mask
.
5.
Set or change the
Gateway
.
6.
Select either No Subnet or No Gateway for
RARP
.
7.
Select
Automatic DNS Settings
to automatically configure the domain name settings.
8.
Enter the
Domain Name
.
9.
Enter the
Primary DNS Server’s
IP address.
10.
Enter the
Secondary DNS Server’s
IP address.
11.
Select
Enable Network Time
to enable the network time protocol, which allows the printer to
query a time server on the network and synchronize the clock in the printer.
Summary of Contents for ADTP1 MonarchNet2
