Avery Berkel XN series Operator Instructions Manual Download Page 21

Page: 21 / 141

Resets the weight display to zero.

Subtracts the weight of the container when
weighing goods.

Retains a tare, if in operation, unit is cancelled.

If configured, retains the PLU until it is cancelled.

Sets the scale to pre-pack if the scale configuration
allows it.

When entering data, clears messages or
characters from the data field.

Confirms data entry.

Function Menu key

Press this key to display the function menu bar.

3.1 Getting started

XM and XT Operator Instructions

3.1.4 Fixed function keys (tactile keypad)

3.1.5 Programmable (dedicated) keys

Twenty programmable keys are available below the touchscreen area.
A customised keyboard overlay sheet can be created and inserted over
these keys to provide legends or images to indicate the functions
assigned to the keys.

Summary of Contents for XN series














































































































































Search results

Summary of Contents for XN series

Reviews:

Related manuals for XN series

Brands by name

Popular brands

Avery Berkel XN series, Operator Instructions Manual

Search results

Summary of Contents for XN series

Reviews:

Related manuals for XN series

Brands by name

Popular brands