5.2 Label/receipt printers
34
XM and XT Operator Instructions
5
5.2.2 Changing the printer roll - backing rewound
(labels or continuous adhesive paper)
Note:
For details of
paper routes and
rewinding the backing
paper, see
3.2, Printer
paper routes
,
page 25
.
1. Pull the red handle until it clicks and then pull out the cassette to
remove it from the scale.
2. Remove the old label roll core and backing paper. Check that the
new label roll is of the right type and size and insert the roll into
the cassette.
3. Feed the paper over the rewind spindle under the paper guide
bar, then over the paper guide and insert the backing paper into
the rewind hub as shown in the illustrations below.
For separate labels, before inserting the new roll, remove labels
from the backing paper for about 400mm. Route the paper
according to the instructions on the yellow label fixed to the
cassette.