AVer IWH5000 Series User Manual Download Page 79

Page: 79 / 247

(6) TV Out

Select the camera you want to appear on TV and set the time gap from 3 to 10 sec. before it

switches to the next camera.

The DVR system supports both analog and IP camera channel on TV output.

Advance:

Select the video card channel and camera that user wants to display on TV. In

Advance mode, user has two types of display selection

–

Autoscan

and

Fixed layout



Autoscan

(1)

The video source.

(2)

Select the display mode as

Autoscan

(3) Preview screen:

Live camera video would be displayed here.

(4) View Mode:

Select the video mode user wants to display on screen. The system will

auto cycle switch to display the next channels.

(5) Cameras:

User can select the cameras that user wants to display on the screen. Only

those selected cameras would be displayed on the screen. Also, the camera will be

displayed by the selecting order.

Summary of Contents for IWH5000 Series
























































































































































































































































Search results

Summary of Contents for IWH5000 Series

Reviews:

Related manuals for IWH5000 Series

Brands by name

Popular brands

AVer IWH5000 Series, User Manual

Search results

Summary of Contents for IWH5000 Series

Reviews:

Related manuals for IWH5000 Series

Brands by name

Popular brands