AVer IWH5000 Series User Manual Download Page 199

Page: 199 / 247

191

POS Keyword:

Enable/disable to scan the data from the POS if it matches the keyword.

Alarm Button:

Enable/disable to active manual alarm function. To define alarm

message of manually alarm trigger. Click alarm button and select the alarm button # and

fill in the description of alarm button.

(5) Alarm Reset

, click the camera number (use



and



to select the alarm) to set the

reset condition of alarm. Once alarm is reset, all alarm action will stop at the moment. If the

sensor normal status is high, set the sensor condition to low.

Alarm Reset Time:

Set a time for the alarm auto reset. When an alarm happen such as

motion detected and video loss, the alarm will reset at the alarm reset time.

(6) Action

you may now set the alarm action for the system to perform when the alarm

condition is activated.

Summary of Contents for IWH5000 Series
























































































































































































































































Search results

Summary of Contents for IWH5000 Series

Reviews:

Related manuals for IWH5000 Series

Brands by name

Popular brands

AVer IWH5000 Series, User Manual

Search results

Summary of Contents for IWH5000 Series

Reviews:

Related manuals for IWH5000 Series

Brands by name

Popular brands