manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 68 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 68

68

NN47250-700  (Version 04.01)

Built the final session statistics packet, passing to AAA.  If RADIUS accounting is enabled, 
this would be sent out as a RADIUS “Stop” accounting packet.

SM Feb 02 01:01:36.687155 DEBUG SM-TRACE: (13) added proc hist @485a662c (4 by AAA 
do_kill_processing - final stats); 9 total

SM Feb 02 01:01:36.687229 DEBUG SM-STATE: (13) AAA do_kill_processing - final stats clearing kill 
lock, lock vector now =0h

Heard back from the last cleanup process, proceeding to kill the session.

SM Feb 02 01:01:36.687301 DEBUG SM-STATE: (13) delete 00:0b:7d:26:9d:d7 from the smdb

Delete the client from the session manager database.

SM Feb 02 01:01:36.687556 DEBUG (13) deleting;  ref count history:

                                                                  1138870896 release_killing_lock by AAA do_kill_processing - final 
stats

                                                                                                                                         1138870896 
release_killing_lock by eapol_kill_client

                                                                                                                                                                                             
1138870896 release_killing_lock by sm_handle_killing_session

                                          1138870896 dont_clear_killing_lock by aaa_sm_notification: not roam-out, and 
SL_AAA set

                                                                                                                                 1138870669 set_killing_lock 
by AAA new session

                                                                                                                                                                               
1138870669 release_killing_lock by sm_handle_move_conf

                      1138870668 set_killing_lock by do_vlan

                                                            1138870667 set_killing_lock by wifi_association

                                                                                                           1138870667 set_killing_lock by 
sm_dot11_handle_associate

Poorly formatted… Releasing all locks from other processes.

SM Feb 02 01:01:36.687672 DEBUG i_smdb_unpublish_ident_by_mac: (13) unpublishing ident by mac

Removing SMDB entry from internal tables.

SM Feb 02 01:01:36.687867 DEBUG SM: (13) removing IP 0.0.0.0

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments