manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 58 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 58

58

NN47250-700  (Version 04.01)

SM Jan 4 02:52:41.184124 DEBUG SM-DOT11: sending associate response 0 to 00:0b:0e:2f:6d:00 for client 
00:10:c6:5d:ae:ae

Responding to association request…

SM Jan 4 02:52:41.184448 DEBUG   20 04 00 01 00 01 00 02 00 2c 00 00 02 01 00 0b

SM Jan 4 02:52:41.184532 DEBUG   0e 2f 6d 02 00 10 c6 5d ae ae 00 0b 0e 2f 6d 02

SM Jan 4 02:52:41.184582 DEBUG   00 00 02 01 00 0b 0e 2f 6d 02 00 10 c6 5d ae ae
SM Jan 4 02:52:41.184632 DEBUG   00 0b 0e 2f 6d 02 d0 1d 11 00 01 00 00 08 73 6c

Hex dump of association response.

SM Jan 4 02body:52:41.184700 DEBUG SM-DOT11: this client is new to us

Setting up new session manager entry for this client

SM Jan 4 02:52:41.186274 DEBUG SMDB: (2) setting radio device id=2, slot=1

The number in parenthesis is the local session-id which is displayed in the output of “show 
sessions network”.  This request also came from the 802.11g radio “slot=1” means radio 1, 
which is the 802.11g radio in this AP.  Pay close attention to the session-id when reading 
traces as it can be confusing when a client roams and there is an older session ID being 
torn down while a newer session-id is coming up.

SM Jan 4 02:52:41.186337 DEBUG SM-TRACE: (re)associate request from device 2

SM Jan 4 02:52:41.186454 DEBUG SM: (2) inserting IP 0.0.0.0

Inserting default value for snooped IP address into table.

SM Jan 4 02:52:41.186561 DEBUG SM-TRACE: state for 00:10:c6:5d:ae:ae --> INITIALIZING

SM Jan 4 02:52:41.186639 DEBUG SM-STATE: (2) mac 00:10:c6:5d:ae:ae, flags 0h, to change state unk 
state 0 -> INITIALIZING, by i_smdb_create

Entering the “INITIALIZING” state of the SM state machine.

SM Jan 4 02:52:41.186767 DEBUG SM-DOT11: (2) client 00:10:c6:5d:ae:ae associated to crypto ssid, 
slipshod

SM Jan 4 02:52:41.186922 DEBUG SMDB: (2) i_smdb_set_service_prof: setting service prof "slipshod"
SM Jan 4 02:52:41.187017 DEBUG SM-STATE: (2) mac 00:10:c6:5d:ae:ae, flags 0h, to change state 
INITIALIZING -> AUTH,ASSOC REQ, by sm_dot11_handle_associate

Transitioning states within SM.

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments