manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 48 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 48

48

NN47250-700  (Version 04.01)

DOT1X Apr 11 20:33:04.707674 DEBUG DOT1X-PACKET: setting id to 
networkid=avayawlan,nasid=nos-3.0,portid=2 in request
DOT1X Apr 11 20:33:04.711374 DEBUG DOT1X-PACKET: EAPoL EAP packet of 54 bytes w/id 1 (with 
retransmit set) sent to 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:04.715237 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 1 seconds
DOT1X Apr 11 20:33:04.783819 DEBUG DOT1X-PACKET:EAPoL START packet received from 
00:05:5d:88:d1:63
DOT1X Apr 11 20:33:04.787403 DEBUG DOT1X-PACKET: Cancelling retrans timer for 
00:05:5d:88:d1:63
DOT1X Apr 11 20:33:04.791069 DEBUG DOT1X-STATE: 00:05:5d:88:d1:63 transition back to 
CONNECTING
DOT1X Apr 11 20:33:04.795066 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 1 seconds
DOT1X Apr 11 20:33:04.798553 DEBUG DOT1X-CLIENT: retransmit packet to 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:04.817116 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 1, len 18, received 
from 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:04.820757 DEBUG DOT1X-PACKET: Cancelling retrans timer for 
00:05:5d:88:d1:63
DOT1X Apr 11 20:33:04.824340 DEBUG DOT1X-CLIENT: glob 'AVAYA\*' matches 'AVAYA\jtran', 
ssid 'avayawlan' matches 'avayawlan': eap_type=254

Like the previous trace, this is a listing of the network access rules which don’t match (not 
shown in this example)

 

or match.

DOT1X Apr 11 20:33:04.828032 DEBUG DOT1X-CLIENT: EAP-ID resp for AVAYA\jtran at 
00:05:5d:88:d1:63 doing PASSTHRU

DOT1X Apr 11 20:33:04.833653 DEBUG DOT1X-CLIENT: eapol_aaa_login (sess=0x1ceef94) 
00:05:5d:88:d1:63 -> AAA

Thes

e two messages indicate that the AAA subsystem is being invoked to authenticate the user. The 

subsequent log

 

messages interleave the RADIUS conversation with the EAP conversation because 

in pass-through mode the WSS is pretty

 

much just a translator between clients who speak EAP and 

servers who speak RADIUS.

DOT1X Apr 11 20:33:04.840747 DEBUG DOT1X-STATE: 00:05:5d:88:d1:63 transition from 
CONNECTING to AUTHENTICATING

DOT1X Apr 11 20:33:04.844308 DEBUG DOT1X-STATS: 00:05:5d:88:d1:63 enters authenticating --> 
342
DOT1X Apr 11 20:33:04.848419 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 1, len 18, received 
from 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:04.852028 DEBUG DOT1X-PACKET: Cancelling retrans timer for 
00:05:5d:88:d1:63

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments