manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 50 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 50

50

NN47250-700  (Version 04.01)

DOT1X Apr 11 20:33:05.063185 DEBUG DOT1X-PACKET: Cancelling retrans timer for 
00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.068243 DEBUG DOT1X-CLIENT: eapol_aaa_continue (sess=0x1ceef94) 
00:05:5d:88:d1:63 forwarded to AAA
DOT1X Apr 11 20:33:05.087828 DEBUG DOT1X-CLIENT: 00:05:5d:88:d1:63 status 
STATUS:GETDATA from AAA
DOT1X Apr 11 20:33:05.091529 DEBUG DOT1X-PACKET: EAPoL EAP packet of 78 bytes w/id 7 (with 
retransmit set) sent to 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.095414 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 6 seconds
DOT1X Apr 11 20:33:05.119408 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 7, len 29, received 
from 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.123004 DEBUG DOT1X-PACKET: Cancelling retrans timer for 
00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.128006 DEBUG DOT1X-CLIENT: eapol_aaa_continue (sess=0x1ceef94) 
00:05:5d:88:d1:63 forwarded to AAA
DOT1X Apr 11 20:33:05.141861 DEBUG DOT1X-CLIENT: 00:05:5d:88:d1:63 status 
STATUS:GETDATA from AAA
DOT1X Apr 11 20:33:05.145584 DEBUG DOT1X-PACKET: EAPoL EAP packet of 42 bytes w/id 8 (with 
retransmit set) sent to 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.149491 DEBUG DOT1X-TIMEOUT: set when_retrans timer for 30 seconds
DOT1X Apr 11 20:33:05.158916 DEBUG DOT1X-PACKET: EAPoL EAP packet, id 8, len 38, received 
from 00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.162580 DEBUG DOT1X-PACKET: Cancelling retrans timer for 
00:05:5d:88:d1:63
DOT1X Apr 11 20:33:05.167624 DEBUG DOT1X-CLIENT: eapol_aaa_continue (sess=0x1ceef94) 
00:05:5d:88:d1:63 forwarded to AAA
DOT1X Apr 11 20:33:05.182130 DEBUG DOT1X-CLIENT: 00:05:5d:88:d1:63 status STATUS:PASS 
from AAA

This message indicates success from the Radius server. If you get a “FAIL from AAA” you 
should check the timestamp between this message and the previous one. If several 
seconds have elapsed either there is a connectivity problem to the radius server or the 
shared secret is wrong. If there is no real elapsed time, then the user was rejected by radius 
and you should check the Radius server logs.

DOT1X Apr 11 20:33:05.185751 DEBUG DOT1X-PACKET: EAPoL EAP packet of 8 bytes w/id 10 (without 
retransmit set) sent to 00:05:5d:88:d1:63

DOT1X Apr 11 20:33:05.189549 DEBUG DOT1X-STATE: 00:05:5d:88:d1:63 transition from 
AUTHENTICATING to AUTHENTICATED

DOT1X Apr 11 20:33:05.193894 DEBUG DOT1X: asked to change name AVAYA\jtran at 00:05:5d:88:d1:63 
to AVAYA\jtran

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments