manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 52 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 52

52

NN47250-700  (Version 04.01)

DOT1X Apr 11 20:33:05.251025 DEBUG DOT1X: Session timeout for 00:05:5d:88:d1:63 set to 3600

DOT1X Apr 11 20:33:05.252763 DEBUG DOT1X-TIMEOUT: set when_reauth timer for 3600 seconds

And we set the re-authentication timer for this user (because he’s WEP we need to 
reauthenticate in order to cycle the key.

RADIUS level 10 trace of 802.1X pass-thru authentication

Radius tracing will displays decodes of all packets sent to or from a RADIUS server, as well as debug 
information from the RADIUS process within NOS. Most of the information in the trace is very repetitive as 
all RADIUS attributes are sent back-and-forth for each RADIUS packet in an 802.1X exchange. The most 
frequently useful portion of the exchange is the very end where the RADIUS server send an “ACCEPT” or 
“REJECT” packet. The “ACCEPT” includes all of the RADIUS attributes configured for that user, many of 
which are used by MSS to authorize the user.

AAA Jan 31 22:44:46.696276 DEBUG (1872) RADIUS: Set srv to sg1/W2k3 (192.168.3.4/1812/1813)

Select the RADIUS server to use with this authentication. In this case it is “W2k3” and is 
part of the server group “sg1”.

AAA Jan 31 22:44:46.696357 DEBUG (1872) RADIUS: set_rad_ident ident=196 local port=20003

Setup an internal identifier and open a local high-port for transmission of RADIUS packets.

AAA Jan 31 22:44:46.696419 DEBUG (1872) RADIUS: session EAP_LOGIN

AAA Jan 31 22:44:46.696479 DEBUG (1872) RADIUS: AAA_SESS_TYPE_ATTR: ignored (invalid sess 
type)
AAA Jan 31 22:44:46.696536 DEBUG (1872) RADIUS: AAA_STATUS_ATTR: ignored (invalid sess 
type)
AAA Jan 31 22:44:46.696594 DEBUG (1872) RADIUS: AAA_SENDER_ATTR: ignored (invalid sess 
type)
AAA Jan 31 22:44:46.696651 DEBUG (1872) RADIUS: AAA_AUTHEN_METHOD_ATTR: ignored 
(invalid sess type)
AAA Jan 31 22:44:46.696708 DEBUG (1872) RADIUS: AAA_NAS_PORT_ID: len=4
AAA Jan 31 22:44:46.696811 DEBUG (1872) RADIUS: Added IETF 87 RAD_NAS_PORT_ID           
vlen=3 1/2
AAA Jan 31 22:44:46.696881 DEBUG (1872) RADIUS: AAA_CALLING_STATION_ID: len=18
AAA Jan 31 22:44:46.696966 DEBUG (1872) RADIUS: Added IETF 31 RAD_CALLING_STATION_ID    
vlen=17 00-0B-7D-1F-FB-F5
AAA Jan 31 22:44:46.697032 DEBUG (1872) RADIUS: AAA_CALLED_STATION_ID: call 
rad_enc_called_station_id

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments