manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 55 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 55

55

Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide

AAA Jan 31 22:44:46.709581 DEBUG (1872) RADIUS: Input:  79  RAD_ATTR_EAP_MSG          vlen=6  
0x1020006....
AAA Jan 31 22:44:46.709640 DEBUG (1872) RADIUS: Call decode fn rad_dec_no_op
AAA Jan 31 22:44:46.709694 DEBUG (1872) RADIUS: rad_dec_no_op RAD_ATTR_EAP_MSG ignored
AAA Jan 31 22:44:46.709768 DEBUG (1872) RADIUS: Input:  24  RAD_ATTR_STATE            vlen=22  
0x16d2034a....
AAA Jan 31 22:44:46.709875 DEBUG (1872) RADIUS: Update binary AAA_RAD_STATE_ATTR 
len=22
AAA Jan 31 22:44:46.709962 DEBUG (1872) RADIUS: Input:  80  
RAD_ATTR_EAP_MSG_AUTHENTICATOR vlen=16  0xf16a543b....
AAA Jan 31 22:44:46.710021 DEBUG (1872) RADIUS: Call decode fn rad_dec_no_op
AAA Jan 31 22:44:46.710074 DEBUG (1872) RADIUS: rad_dec_no_op 
RAD_ATTR_EAP_MSG_AUTHENTICATOR ignored

Decode packet and call appropriate functions to relay EAP payload back to dot1x.

AAA Jan 31 22:44:46.717308 DEBUG (1872) RADIUS: Force preferred dot1x srv sg1/W2k3 (192.168.3.4/
1812/1813)

Force the WSS to use the same RADIUS server for all packets subsequent to the first.

AAA Jan 31 22:44:46.717403 DEBUG (1872) RADIUS: Set srv to sg1/W2k3 (192.168.3.4/1812/1813)

AAA Jan 31 22:44:46.717464 DEBUG (1872) RADIUS: set_rad_ident ident=197 local port=20003

AAA Jan 31 22:44:46.717522 DEBUG (1872) RADIUS: session EAP_LOGIN
AAA Jan 31 22:44:46.717579 DEBUG (1872) RADIUS: AAA_SESS_TYPE_ATTR: ignored (invalid sess 
type)

…<deleted for brevity – several pages of similar decodes for each packet in an EAP 
exchange>…

AAA Jan 31 22:44:46.865712 DEBUG (1872) RADIUS:  80  RAD_ATTR_EAP_MSG_AUTHENTICATOR 
vlen=16  0xb17f1471....

AAA Jan 31 22:44:46.865845 DEBUG (1872) RADIUS: Set timer handle 1208220736 duration 5
AAA Jan 31 22:44:46.865957 DEBUG (1872) RADIUS: local ip addr is 192.168.12.7

Repeat the same process for all packets in the EAP exchange.

AAA Jan 31 22:44:46.868037 DEBUG (1872) RADIUS: REPLY <203,1812,192.168.3.4>:20003, 
ACCESS_ACCEPT, len 268

Receive an “ACCESS ACCEPT” packet from the RADIUS server.  This is where it gets 
interesting.

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments