manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 61 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 61

61

Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide

Populating the client’s information in the cluster database.  This is information is pushed 
out all of the WSSs in the mobility domain to assist inter-WSS roaming and preservation of 
accounting data across roams.

SM Jan 4 02:52:43.208429 DEBUG SM-NOTIFY: vlan_if_find_by_name("default") -> vlanp w/
name="vlan:1", num=1
SM Jan 4 02:52:43.208778 DEBUG SM-STATE: (2) setting mapping tag to 1
SM Jan 4 02:52:43.208840 DEBUG SM-EVENT: (2) added vport, i/f "2049", vlan "default", tag 1(1)

Populating the FDB with the client’s entry on the proper VLAN, and finalizing the VLAN 
tunnel to the AP.

SM Jan 4 02:52:43.208987 DEBUG SM-EVENT: (2) enabled forwarding for 00:10:c6:5d:ae:ae, going 
ACTIVE

All of the low-level FDB work is done, and the switch is now forwarding traffic to/from the 
client.

SM Jan 4 02:52:43.209079 DEBUG SM-STATE: (2) mac 00:10:c6:5d:ae:ae, flags 28832ch, to change state 
AUTHORIZED -> ACTIVE, by sm_handle_authorized

SM Jan 4 02:52:43.209151 DEBUG SM-EVENT: (2) sending sm/active to fsm sm central fsm

Changing state again, and more notifications to the SM state machine.

SM Jan 4 02:52:43.209199 DEBUG SM-EVENT: (2) sending aaa/sm/notify to fsm net/igmp

Notify IGMP that there is a new client.

SM Jan 4 02:52:44.208859 DEBUG SM-ROAM:  got RE_ASSO_CONF for localid 2, mac 00:10:c6:5d:ae:ae, 
status=CLUSTER

SM Jan 4 02:52:44.208968 DEBUG SM-TRACE: (2) added proc hist @484c10ac (4 by 
sm_handle_move_conf); 4 total
SM Jan 4 02:52:44.209029 DEBUG SM-STATE: (2) sm_handle_move_conf clearing kill lock, lock vector 
now =ah
SM Jan 4 02:52:44.209085 DEBUG SM-STATE: (2) clear lock 4 for sm_handle_move_conf (now ah) but 
state =ACTIVE, not KILLING
SM Jan 4 02:52:44.209137 DEBUG SM-ROAM: (2) got conf for sess in state ACTIVE
SM Jan 4 02:52:44.209176 DEBUG SM-EVENT: (2) send SM_AAA_SESS_START to AAA

SM Jan 4 02:52:44.209672 DEBUG SM-TRACE: (2) added proc hist @4855ac2c (3 by AAA new session); 5 
total

SM Jan 4 02:52:44.209740 DEBUG SM-STATE: (2) AAA new session bumps kill lock vector to eh

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments