manualshive.com logo in svg

Avaya WLAN Security Switch 2300 Series, Troubleshooting And Debug Manual, Page: 63 / 74

Share
Download
Avaya WLAN Security Switch 2300 Series Troubleshooting And Debug Manual Download Page 63

63

Avaya WLAN Security Switch 2300 Series Troubleshooting and Debug Guide

SM Jan 4 02:52:49.163868 DEBUG SMDB: (3) i_smdb_set_service_prof: setting service prof "slipshod"

SM Jan 4 02:52:49.164057 DEBUG SM-STATE: (3) mac 00:0b:7d:26:9d:d7, flags 0h, to change state 
INITIALIZING -> AUTH,ASSOC REQ, by sm_dot11_handle_associate
SM Jan 4 02:52:49.164173 DEBUG SM-STATE: (3) mac 00:0b:7d:26:9d:d7, flags 0h, to change state 
AUTH,ASSOC REQ -> AUTH AND ASSOC, by sm_dot11_handle_associate
SM Jan 4 02:52:49.164245 DEBUG SM-EVENT: (3) sending net/dot1x/eapol/associate to fsm net/dot1x/
eapol

SM Jan 4 02:52:49.164330 DEBUG SM-TRACE: (3) added proc hist @4855ad2c (3 by 
sm_dot11_handle_associate); 1 total

SM Jan 4 02:52:49.164390 DEBUG SM-STATE: (3) sm_dot11_handle_associate bumps kill lock vector to 2h

SM Jan 4 02:52:49.164435 DEBUG SM-EVENT: (3) incrementing loadbal session on port 2049

SM Jan 4 02:52:49.164663 DEBUG SM-TRACE: (3) added proc hist @4855abac (3 by wifi_association); 2 
total

SM Jan 4 02:52:49.164727 DEBUG SM-STATE: (3) wifi_association bumps kill lock vector to ah

SM Jan 4 02:52:49.164770 DEBUG SM-ROAM: (3) wifi_association bumps roam refcount to 1

SM Jan 4 02:52:49.469541 DEBUG SM_STATE: localid 3, setting recv key of 32 bytes

SM Jan 4 02:52:49.469618 DEBUG SM_STATE: localid 3, setting send key of 32 bytes

Generating the encryption keys. This did not occur with the previous authentication 
because this one is WPA/TKIP while the previous one was static WEP.

SM Jan 4 02:52:49.470703 DEBUG SM: (3) 00:0b:7d:26:9d:d7 i_smdb_set_ingress_filter NULL by 
set_smdb_from_author_attrs

SM Jan 4 02:52:49.470799 DEBUG SM: (3) 00:0b:7d:26:9d:d7 i_smdb_set_vlan_name=NULL by 
set_smdb_from_author_attrs
SM Jan 4 02:52:49.471237 DEBUG smdb_insert_vlan: store ("default"+cruft, tot 18): 0

SM Jan 4 02:52:49.471311 DEBUG SM: (3) 00:0b:7d:26:9d:d7 i_smdb_set_vlan_name=default by 
set_smdb_from_author_attrs

SM Jan 4 02:52:49.471515 DEBUG SM-TRACE: (3) added proc hist @4855a8ac (3 by do_vlan); 3 total

SM Jan 4 02:52:49.471577 DEBUG SM-STATE: (3) do_vlan bumps kill lock vector to 1ah

SM Jan 4 02:52:49.471928 DEBUG SM-STATE: (3) mac 00:0b:7d:26:9d:d7, flags 20000ch, to change state 
AUTH AND ASSOC -> AUTHORIZING, by aaa_dot1x_process_author_data

SM Jan 4 02:52:49.472017 DEBUG SM-EVENT: (3) sending net/dot1x/eapol/authorizing to fsm net/dot1x/
eapol

SM Jan 4 02:52:49.473685 DEBUG SM-STATE: (3) setting tag to 2

Summary of Contents for WLAN Security Switch 2300 Series











































































Reviews:

No comments