9. Log back in to the device once the application restarts.
10. Use the command
show network
to confirm the new network information was applied.
11. If the network information was applied properly, close the Console connection.
12. Disconnect the Console cable used to connect the laptop to the PDU.
13. Connect the PDU to the correct port on the switch. See the
Customer Lifecycle Workbook
for
port information.
14. Use the browser provided with the MSC to connect to the PDU management software.
15. Log into the management software to confirm connectivity.
16. Repeat these steps for the next PDU if more than one requires configuration.
Related links
Checklist for replacing a Power Distribution Unit
on page 53
Checklist for replacing a Power Distribution Unit
October 2017
Troubleshooting the Avaya Pod Fx
™
59