e. Use the
save config
command to save the configuration.
f. End the SSH session.
g. Logout.
4. Configure PDUs to send SNMP traps.
a. Log in as the
admin
user to the HTTPS web interface.
b. Select
Configuration
>
SNMP/Thresholds
from the menu.
c. Locate the field
Trap Destination 2
.
d. Enter the SAL Gateway IP address in the field.
e. Click
Apply
.
f. Logout.
5. Configure the vCenter Server Appliance to send SNMP traps.
a. Log in to the VCSA web client located at:
https://<VCSA-IP-ADDRESS>:9443/vsphere-
client/
.
b. Select the applicable vCenter instance.
c. Select
Manage
>
Settings
>
General
from the menu.
d. Click
Edit
.
e. Select
SNMP receivers
.
f. Enter the SAL Gateway IP address in the next available receiver field.
g. Verify that it is enabled.
h. Click
OK
.
i. Logout.
6. Configure the EMC VNXe3200 to send SNMP traps.
a. Log in as the
admin
user to the HTTPS web interface. The web interface is located:
https://EMC_MGMT_IP_ADDRESS
.
b. Select
Settings
>
More configuration
>
Alert Settings
from the menu.
c. Click
Add
under
SNMP alerts
.
d. Enter the IP address of the SAL Gateway.
e. Enter the user name
avaya123
.
f. Select
None
for the
Authentication Protocol
.
g. Click
OK
.
h. Logout.
7. Configure HP iLO to send SNMP traps.
a. Log in to the web interface of the HP iLO. The web interface is located at:
https://
HP_iLO_IP_ADDRESS
.
Configuring monitoring and alerts
October 2017
Troubleshooting the Avaya Pod Fx
™
22