Static addressing
field
Field value
Description
VLAN Test
ddd
VLANTEST
where:
•
nnn.nnn.nnn.nnn
is the current IP address in IPv4 format associated with the
specific address information on the left side, which could be either a value
previously set by a technician, or the original value of NVIPADD if no previous
change was made,
•
hhhh:hhhh:hhhh:hhhh:hhhh
is the current IP address in IPv6 format
associated with the specific address information on the left side, which could
be either a value previously set by a technician, or the original value of
NVIPADD if no previous change was made,
•
L2Q text string
is the text string associated with the current system value of
L2Q where
Auto
= an L2Q value of
0
,
On
= an L2Q value of
1
, and Off = an
L2Q value of
2
, and
•
dddd
is the current value of NVL2QVLAN and
ddd
is the current value of
NVVLANTEST, respectively.
2. Use the navigation arrows to scroll to and highlight the address you want to change,
then press
Change
to display the change screen for that specific address value.
3. Select one of the following as appropriate to the item you selected:
Task
Steps
To change any of the
IP address values
such as Phone, Call
Server, Router, Mask,
and File Server
Use the dial pad to enter the new IP address. IP
addresses have three sets of three digits followed by a
period. Pressing star (*) following entry of three digits
causes a period to be placed in the next position, and
the cursor to advance one position to the right. If you
press the star (*) and enter an IPv6 address, a colon is
inserted into the input buffer and the cursor is moved to
the next character location.The exceptions are entry of
a Router or Mask address, which follows the IPv4
method of inserting a period rather than a colon. For
information on entry and validation of addresses in either
format, see
Entering and validating IPv4 and IPv6
on page 41. For example, to enter the IP
address 111.222.333.444 in IPv4 format, press the
number 1 on the dial pad three times then press
*
, press
the number 2 on the dial pad three times then press
*
,
press the 3 on the dial pad three times then press
*
, then
press the 4 on the dial pad three times.
To enter an IP address in IPv6 format, use the dial pad
in numeric-only mode entry. Tap the desired dial pad key
once for touch screen deskphones, except for
2
and
3
which are alphanumeric. Use multi-tap for touch screen
Using Local Administrative Craft Options
48 Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G
August 2013