manualshive.com logo in svg

Avaya H.323 9621G, Installing And Maintaining, Page: 77 / 94

Share
Download
Avaya H.323 9621G Installing And Maintaining Download Page 77

Message

Cause/Resolution

RESOLUTION: Confirm the extension is correct and is correctly
administered on the switch. Then try registration again, and enter the
extension accurately.

Bad FileSv
address

CAUSE: The HTTP/HTTPS server IP address in the IP deskphone’s
memory is all zeroes.
RESOLUTION: Depending on the specific requirements of your
network, this may not be an error. If appropriate, either administer the
DHCP server with the proper address of the HTTP/HTTPS server, or
administer the deskphone locally using the ADDR option. For details
on the ADDR option, see 

Using Local Administrative (Craft)

Options

 on page 37.

Bad Router?

CAUSE: The deskphone cannot find a router based on the information
in the DHCP file for GIPADD.
RESOLUTION: Use static addressing to specify a router address, or
change administration on DHCP. For deails, see

Administering Avaya

IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

.

Call Error

CAUSE: The user was on a call when the connection to the
gatekeeper went down due to a network outage or a gatekeeper
problem. The deskphone attempted to automatically register with the
same or another gatekeeper, but the responding gatekeeper had no
record of the call.
RESOLUTION: Wait for the call to end, and if the deskphone does not
automatically register, restart the deskphone.

Connecting...

CAUSE: The deskphone is attempting to establish a TCP connection
with the call server. A resource needed to establish the connection
might not be available or the 10 second buffer on switch-related
actions might have expired.
RESOLUTION: Allow the deskphone to continue attempts to connect
to TCP.

Contacting
call server...

CAUSE: The deskphone has rebooted successfully and is attempting
to register with the call server.
RESOLUTION: Allow the deskphone to continue.

DHCP: CONFLICT
* to program

CAUSE: At least one of the IP address offered by the DHCP server
conflicts with another address.
RESOLUTION: Review DHCP server administration to identify
duplicate IP address(es).

DHCPv6
Failure: (with
message)

CAUSE: The deskphone receives a reply message with a Status Code
option that contains a status-code of 1 which means 

UnspecFail

 or a

reply in response to a 

Renew

 or 

Rebind

 message with a Status Code

option containing a status-code value other than 0 that indicates

Success

 or 5 which indicates 

UseMulticast

.

RESOLUTION: In the first case, DHCPv6 will be restarted. If this
message is the result of a status-code value other than 1 or 5,
IPADDV6 will be set to null; if dual-stack operation is enabled the

Installation error and status messages

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013     77

Summary of Contents for H.323 9621G































































































Reviews:

No comments