Menu or Home screen as applicable to the phone, and select the Settings list.
The
About Avaya IP Deskphone
screen with a
U
appended to the software
release indicates the phone has VPN and media encryption disabled.
Setting the Operational Mode to 802.1X
About this task
Use the following procedure to set or change the operational mode.
Note:
When updating local Craft procedures from a touch screen deskphone, touching the line
you want to change or the applicable softkey produces the same result as selecting a line
and pressing the applicable softkey on a non-touch screen IP deskphone.
Procedure
1. When you select 802.1X from the Craft Local Procedure Screen, the deskphone
displays the following text:
Supplicant:
Pass-thru:
where the Supplicant line is the text string associated with the current system value
of DOTIXSTAT. The DOTIXSTAT parameter configures the 802.1X Supplicant
Mode operation control, defined as:
•
Disabled
if DOT1XSTAT = 0
•
Unicast-only
if DOT1XSTAT = 1
• Unicast/multicast if DOT1XSTAT = 2
and the Pass-thru line is a text string associated with the current system value
of DOT1X where:
•
Enabled mode
if DOT1X = 0
•
Enabled w/Logoff
if DOT1X = 1
•
Disabled
if DOT1X = 2
2. Select the line you want to change, then press
Change
.
3. Depending on which line you selected to change, the deskphone displays the
following text:
Current setting:
New Setting:
If you selected the Supplicant line, the [current] setting is the text string associated
with the current system value of DOTIXSTAT. If you selected the Pass-thru line, the
Setting the Operational Mode to 802.1X
Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G
August 2013 45