manualshive.com logo in svg

Avaya H.323 9621G, Installing And Maintaining, Page: 7 / 94

Share
Download
Avaya H.323 9621G Installing And Maintaining Download Page 7

Chapter 1:  Overview

Deskphone models relevant to this guide

The Avaya 9600 Series IP Deskphone family currently includes the following 15 telephone
models. This guide describes only four models: 9608, 9611G, 9621G, and 9641G. For
information about the other models, see 

Avaya one-X

®

 Deskphone H.323 Administrator

Guide,16-300694

.

• 9608

• 9620C

• 9630G

• 9650

• 9610

• 9620L

• 9640

• 9650C

• 9611G

• 9621G

• 9640G

• 9670G

• 9620

• 9630

• 9641G

The deskphones have an Ethernet switch with which the telephone and a PC can share the
same LAN connection, if appropriate. Thus, these models do not work with the 30A switched
hub interface. The 9611G, 9621G, and 9641G models have a gigabit Ethernet (GigE) interface,
which speeds data transmission. The 9641 also has an integrated Bluetooth

™

 interface. For

information about the setup of a Bluetooth device, see 

Using Avaya IP Deskphone H.323 9621

and 9641,

16-602638.

This document describes the installation of the four deskphones and post-installation
maintenance issues for those phones. For information about using deskphone features, see
the user documentation for each deskphone. For information about desk mounting or wall
mounting, see the instructions boxed with the telephone. For instructions about wall mounting
or desk mounting, see the Avaya Support website at 

http://www.avaya.com/support

.

Change history

Issue 1

Issued in August, 2010. This release supported 9600 Series IP deskphone
Software Release 6.0 and the addition of four new deskphone models: 9608,
9611G, 9621G, and 9641G. Release 6.0 is compatible with Release 6.0 of Avaya

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013     7

Summary of Contents for H.323 9621G































































































Reviews:

No comments