manualshive.com logo in svg

Avaya H.323 9621G, Installing And Maintaining, Page: 52 / 94

Share
Download
Avaya H.323 9621G Installing And Maintaining Download Page 52

 Note:

When updating local (Craft) procedures from a touch screen deskphone, touching the line

you want to change or the applicable softkey produces the same result as selecting a line

and pressing the applicable softkey on a non-touch screen IP deskphone.

Use the following procedure to clear the deskphone of the administrative, user-assigned, and

options values.

Procedure

1. Select CLEAR from the Craft Local Procedure Screen. The deskphone displays the

Press Clear again to confirm.

 message.

2. Press 

Cancel

. If you do not want to clear all values and to terminate the procedure

and retain the current values.
Press 

Clear

 to clear all values to use initial default values.

The deskphone displays the following text:

Clearing values...

 

The deskphone is reset to the default factory settings.

• All system values and system initialization values.
• 802.1X identity and password.
• User options, parameter settings, identifiers, and password.
• Any user data like Contact Lists or Call Logs are deleted.

After clearing the values, the deskphone resets.

Adjusting contrast on button modules and non-color
deskphones

About this task

 Note:

When updating local or Craft procedures from a touch screen deskphone, touching the line

you want to change or the applicable softkey produces the same result as selecting a line

and pressing the applicable softkey on a non-touch screen IP deskphone.

bar

Use the following procedure to adjust the contrast of any button module when attached to any

9600 Series IP deskphone or any non-color IP deskphone. The 9611G, 9621G, and 9641G

Using Local Administrative Craft Options

52     Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013

Comments? [email protected]

Summary of Contents for H.323 9621G































































































Reviews:

No comments