Avaya H.323 9621G Installing And Maintaining Download Page 41 | Manualshive

Page: 41 / 94

Avaya H.323 9621G Installing And Maintaining Download Page 41

If you press star (*) and enter an IPv4 address, the system inserts a decimal point
into the input buffer and moves the cursor to the next character location. If the star
(*) button is pressed and the user is entering an IPv6 address, the system inserts
a colon into the input buffer and the cursor is moved to the next character location.
For more information on IPv4 and IPv6 format, see

Entering and validating IPv4 and

on page 41

4. To go back one space on non-touch screen phones, press the leftmost softkey. In

case of a touch screen deskphone, use the

Bksp

softkey instead.

When you press the applicable button or key to backspace, the most recently
entered digit or period is erased from the display. The cursor remains in the erased
character’s former position.

5. Press

Exit

or tap the softkey for a touch screen deskphone to exit the local

procedures.

Important:

If any changes were made using the 802.1X procedure or the ADDR procedure,
if the value of SIG was changed to SIP or if the Crafts Entry screen was invoked
during startup, the deskphone immediately resets when you press or touch

Exit

. If no 802.1X, SIG, or ADDR changes were made, or if the local procedures

were invoked post-startup, the deskphone redisplays the screen or other display
that was effective when the craft options was invoked.

Note:

If PROCSTAT has been administered to 1, you will not be able to invoke any
administrative options other than VIEW.

Note:

Some touch screen deskphones present an onscreen keyboard with which you
can

type

the data that you want to enter on the display. See the applicable user

guide for information about using the onscreen keyboard.

Entering and validating IPv4 and IPv6 addresses

The dialpad uses numeric-only entry when an IPv4 address or the subnet mask is entered. On
a touch screen use a single tap. Use an asterisk to place a period within the address being
entered.

When you press star (*) on the dial pad with the cursor in one of the three fields towards the
left of the display, the following happens:

Entering and validating IPv4 and IPv6 addresses

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013 41

«
...
39
40
41
42
43
...
»

Summary of Contents for H.323 9621G































































































Reviews:

No comments