55
If your central station requires programming of letters as well as numbers, refer to the HEX
programming description. Use the regular programming method of entering each letter or number
in each address, as explained in the programming table (HEX method).
Contact ID Format (known also as Ademco Express):
This is the fastest to program and easiest
to use format, with communication speed achieved by the DTMF signaling.
When using this format, program only the CS telephone numbers and subscriber ID; all reports
automatically transmitted, without programming anything else.
2.8
Reset System to Default Programming
In case you made programming changes and the system operation is wrong it is recommended to
set system to the defaults program.
Warning,
this function erases all codes and system
programming settings.
1. Enter program mode.
2. Go to address 200 and enter ‘6’ and ‘9’. Display will show
E P R
, and system will revert to
factory default program. Code No. 1 is 1 2 3 4; programming code will be 1 9 9 4.
Quitting and Updating new Programming via AV-701 Keypad
Upon programming completion, hold down key 9.
Wait for a long beep, and then release the key.
When ‘P’ is no longer displayed, the system has reverted to Disarmed mode.
Note:
Erroneous or conflicting programming features are discarded by the system upon quitting
program mode. For example: Programming the same zone as 24H type and Delayed zone will be
recognized only as a 24H zone.
Reset System to Default Codes (In case code is lost)
To enable this feature, enter 8 in address 072.
Hold-down keys
*
#
Press both
together
during 5 seconds after power-on (by applying AC and
Battery); after 2
nd
beep, release keys; ‘U’ will be displayed 3 times in confirmation.
User code No. 1 (1234) and programming code (1994) will reset to default.
