45
Table 10
: Addresses 201 to 350 contains the codes that are reported for the selected events. The
codes programmed as default factory default; you may change them according to your central
station requirements. Do not program if Contact ID format selected.
Table 11
: Addresses 500 to 531 provides to set the required zone for each partition. The default is
zone 1-32 to be in partition No. 01.
Table 12
: Addresses 532 to 547 provides to set the required users for each partition. The default is
users 1 to 16 to Arm and Disarm partition No. 01.
Table 13
: Addresses 550 to 605 the time set for each timer, and selects which partition will be
Armed and Disarmed at this time. Each automatic Arming or Disarming can enabled or disabled.
NOT OPERATIVE YET (marked with cross lines)
Table 14
: Addresses 619 to 762 contains the communicator Subscriber ID Code transmitted to the
central station. Follow EASY program instructions for fast subscriber ID codes programming.
Programming Mode automatic timeout is three minutes for user programming mode and
fifteen
minutes for installer programming mode
