AUX ASW-H09A4/EAR1-dw, Service Manual

Page: 63 / 76

- 61 -
3
Electrical
component 1) Do No. “1” firstly;
2) Pull out all tie-in connecting with
PCB and the temperature sensor, etc.;
3) Screws off the screws and bolts at
the three positions indicated in the
picture. Untie the outdoor unit’s
interconnection cord and power supply
cord from the terminal of the electrical
box.
4) If the main PCB board is loosed by
chance, remove it away;
4
Evaporator 1) Do No.”1” , “2” and “3” firstly;
2) Offload the connecting pipe;
3) Offload the tube clip at the rear;
4) Screw off the bolts at the right and
left side;
5) Lift up the evaporator, and draw it
out from the indoor unit;
5
Indoor fan
and fan
motor
1) Offload the motor from the indoor
fan;
2) Offload the indoor fan from bearing;