Autonics AiC Series, User Manual

Page: 45 / 88

8 Control Input/Output
© Copyright Reserved Autonics Co., Ltd. 45
8.1.1.6 Step2, 3/SSP0, 1 (start speed)
(1) Step2, 3
It is available to set the start address of program mode among 0 to 63 range by 6-digit bit
of Step0 to Step5.

Step0=Least significant bit

Step5=Most significant bit
(2) SSP0, 1
It is available to set the start drive speed of jog mode, continuous mode by 2-digit bit of
SSP0, SSP1.
SSP1 SSP0
Start speed 1 OFF OFF
Start speed 2 OFF ON
Start speed 3 ON OFF
Start speed 4 ON ON
Start speed 5 is not available.
8.1.1.7 Step4, 5/MSP0, 1 (max speed)
(1) Step4, 5
It is available to set the start address of program mode among 0 to 63 range by 6-digit bit
of Step0 to Step5.

Step0=Least significant bit

Step5=Most significant bit
(2) MSP0, 1
It is available to set the max. drive speed of jog mode, continuous mode by 2-digit bit of
MSP0, MSP1.
MSP1 MSP0
Max speed 1 OFF OFF
Max speed 2 OFF ON
Max speed 3 ON OFF
Max speed 4 ON ON
Max speed 5 is not available.