Autonics AiC Series, User Manual

Page: 6 / 88

Safety Considerations
vi © Copyright Reserved Autonics Co., Ltd.
Safety Considerations

Following these safety precautions will ensure the safe and proper use of the product and
help prevent accidents, as well as minimizing possible hazards.

Safety precautions are categorized as Warnings and Cautions, as defined below:
Warning
Failure to follow these instructions may result in serious
injury or death.
Caution
Failure to follow these instructions may result in personal
injury or product damage.

Fail-safe device must be installed when using the unit with machinery that may cause
serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment,
ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime/disaster
prevention devices, etc.)
Failure to follow this instruction may result in fire, personal injury, or economic loss.

Do not connect, repair, or inspect the unit while connected to a power source.
Failure to follow this instruction may result in fire.

Install the unit after considering counter plan against power failure.
Failure to follow this instruction may result in personal injury, or economic loss.

Check 'Connections' before wiring.
Failure to follow this instruction may result in fi re.

Do not disassemble or modify the unit.
Failure to follow this instruction may result in fire.

Install the driver in the grounded housing or ground it directly.
Failure to follow this instruction may result in electronic shock, personal injury.

Do not touch the unit during or after operation for a while.
Failure to follow this instruction may result in burn due to high temperature of the surface.

Emergency stop directly when error occurs.
Failure to follow this instruction may result in fi re, or personal injury.

When connecting the power input, use AWG 18(0.75mm
2
) cable or over.

Install over-current prevention device (e.g. the current breaker, etc) to connect the driver
with power.
Failure to follow this instruction may result in fire.

Check the control input signal before supplying power to the driver.
Failure to follow this instruction may result in personal injury or product damage by
unexpected signal.

Install a safety device to maintain the vertical position after turn off the power of this driver.
Failure to follow this instruction may result in personal injury or product damage by
releasing holding torque of the motor.

Use the unit within the rated specifi cations.
Failure to follow this instruction may result in fire or product damage.