Autonics AiC Series, User Manual

Page: 30 / 88

4 Installation of Motor
30 © Copyright Reserved Autonics Co., Ltd.
4.4 Installation Conditions
Install the motor in a place that meets certain conditions specified below.
It may cause product damage if instructions are not following.
①
The inner housing installed indoor
(This unit is manufactured and designed for attaching to equipment. Install a ventilation device.)
②
Within -10 to 50
℃
(at non-freezing status) of ambient temperature
③
Within 35 to 85%RH (at non-dew status) of ambient humidity
④
The place without explosive, flammable and corrosive gas
⑤
The place without direct ray of light
⑥
The place where dust or metal scrap does not enter into the unit
⑦
The place without contact with water, oil, or other liquid
⑧
The place without contact with strong alkali or acid material
⑨
The place where easy heat dissipation could be made
⑩
The place where no continuous vibration or severe shock
⑪
The place with less salt content
⑫
The place with less electronic noise occurs by welding machine, motor, etc.
⑬
The place where radioactive substances and magnetic fields does not exist and is not in the
vacuum status