Automation Direct Stellar SR55 Series, User Manual

Page: 139 / 202

Chapter 5: Communications
Page 5–13 Stellar
®
SR55 Series Soft Starter User Manual – 1st Ed, Rev F – 09/18/2019
e
Ther
n
eT
/ip n
eTWork
C
ommuniCaTions
(
ConTinued
)
• If the PC is set to a different IPv4 network than the SR55, ie, both PC and SR55 are not set to
the same first two octets (1011xxxxxx in this example), the following error will be returned:
• If the IPv4 Ethernet address is incorrect, the following error will be returned (notice that unlike
the previous error, this error returns “Destination host unreachable”):
• If Ping from the PC to the SR55 does not work, please recheck that a cross-over cable or an
Ethernet switch (NOT a router) is being used to connect the PC to the SR55
• Also check that the header pins between the comm module and the SR55 were not bent
(extreme care must be taken when inserting the module into the starter)