manualshive.com logo in svg

Automation Direct Stellar SR55 Series, User Manual

Share
Download
Automation Direct Stellar SR55 Series User Manual Download Page 10

TOC–2

Stellar

®

 SR55 Series Soft Starter User Manual – 1st Ed, Rev F – 09/18/2019

Table of Contents

Chapter 3:  Configuration and Parameters  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–1

“Heartbeat” LED  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–2
Configuration Overview�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–2

Auto Setup Procedure  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–2
Setup by Individual Parameter Settings  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–2

Configuration From Touchscreen   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–2

Auto Setup Procedure from Touchscreen   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–2
Individual Parameter Settings from Touchscreen  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–2
Touchscreen Pictorial Example – Auto Setup�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–3

Auto Setup Procedure – Parameter Settings  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–4
Parameter Summary   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–6

Summary of Parameters Not Configurable Through Touchscreen Menu  �  �  �  �  �  �  �  �  �   3–6
Summary of Parameters for Auto Setup  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–6
Summary of Parameters for Individual Parameter Setup  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   3–7

Block Transfer Parameters   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–14
Parameter Details  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–15

Parameters Not Configurable Through Touchscreen Menu   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–15
Parameters in Sequence and Grouped by Touchscreen Navigation  �  �  �  �  �  �  �  �  �  �  �  � 3–20
“Auto Setup” Menu of Parameters   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–20
“Advanced” Menu of Parameters  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–22
“I/O” Menu of Parameters �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–44
“Monitor” Menu of Parameters  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–53
“Log” Menu of Parameters�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–59
“Device” Menu of Parameters �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–78

Trip Code Descriptions  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–84
Fail Safe Codes�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–86

Main Board Trip (2402 – 2436)   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–86
Touchscreen Trip (2501 – 2581)  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–86
Logging Trip (2601 – 2603)  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–87
Fail Safe Trip Codes�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  � 3–87

Saving and Loading an SR55 Configuration File  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  3–88

Chapter 4:  Principles of iERS (intelligent Energy Recovery System)  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   4–1

Principles of the iERS  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  4–2

Enabling Intelligent Energy Recovery System (iERS)�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   4–2
Principles of iERS �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   4–3
Advantages of iERS�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   4–4
How Much Energy?�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   4–5
Estimating Energy Savings�  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   4–6
iERS with the SR55 System   �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �   4–7

Chapter 4 Glossary of Terms  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  �  4–8

Summary of Contents for Stellar SR55 Series











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands