Owner Installation Instructions
GDO-10V2L2 Toro
™
7
SmartSolar™ Compatibility (Optional)
The opener can be fi tted with a SmartSolar™ kit (Part Number 60142) for operation
where mains power access is not available.
NOTE:
If the door is the only entrance to
the garage, a keyed cable release should be fi tted external to the garage.
Vacation Mode
A hand held transmitter can be programmed to lock and unlock all other
transmitters that have been programmed into the openers’ memory. The Vacation
Mode can be used when the door is left idle for long periods of time.
Pet/Pedestrian Mode
The transmitter can be programmed to open the door to an adjustable partial height
so that the family pet can enter and exit the garage at any time. You may also wish to
open the door to a height suitable only for pedestrian access.
Auto-Close Mode
The opener can be programmed to automatically close after an open cycle. The Auto-
Close time is adjustable. It is compulsory to install a
Safety Beam
if this mode is selected,
otherwise the door may cause personal injury or damage to property.
Safety Beams (S.B)
The opener has three inputs to connect one, two or three Safety Beams for extra safety and use of the
Auto-Close mode.
Manual Operation
The opener is equipped with a unique patented manual disengaging device. If the power to the opener is
disrupted for any reason, the door can be put into manual mode by pulling down on the string handle, then
releasing. This will allow you to manually open or close the door. When power is restored, by pulling down on
the string handle and releasing, the opener is put back into automatic mode
.
