Owner Installation Instructions
Easy Slider - Sliding Gate Opener
15
Initial electrical installation
CAUTION: Cables which have a green/yellow
coloured insulation are for earthing purposes
only. Never use these cables for any other
purpose.
Step 1. Installing antenna
Mount the antenna at or above the height of the gate
or fence (which ever is higher) for optimal reception.
Do not cut the coaxial cable.
Step 2. Connecting motor1 (master) and
motor2 (slave) drive units
When dual gates are to be used the master and
slave openers are connected via a five (5) wire cable
(Fig. 07)
. Ensure that each end of the cable passes
through a suitable cable gland which in turn is securely
tightened to prevent ingress of dust, pests and water.
NOTE:
The controller permits either Motor 1 or Motor
2 to be selected to open first, therefore, the side that
each drive unit is mounted on is not fixed to which
gate opens first.
Step 3. Selecting left or
right hand installation
Refer to
(Fig. 08)
and
(Fig. 09)
, place the motor
connector for each drive unit as required.
07
fig
08
fig
09
fig
Left hand
Right hand
