Owner Installation Instructions
Easy Slider - Sliding Gate Opener
37
Specifications
Technical Specifications
Protection rating:
IP33
Input voltage:
230V - 240V AC 50Hz
Transformer primary voltage:
230V/240VAC
Secondary voltage:
24V AC 150 VA
Controller voltage:
24V DC
Motor type:
Permanent Magnet Direct Current
Motor voltage:
24V DC
Maximum pulling force:
200N
Maximum gate opening:
1,2
Width:
Height:
5700mm
250kg
Opener maximum
Opening/closing run time:
30 seconds
Receiver type:
UHF 433.92 MHz am Receiver
Receiver code storage capacity:
30 x 4 Button Transmitter Codes
Transmitter frequency:
433.92 MHz
Coding type:
Hopping Code
No. of code combinations:
Over 4.29 billion random codes
Code generation:
Non-linear encryption algorithm
Transmitter battery:
A23 Alkaline 12V
NOTE:
1. The maximum opening that the EasySlider can be installed on is 5700mm wide and 250kg. The gate must
be well balanced. A person should be able to move the gate manually with very little effort (15kg force max.)
in case of an emergency.
2. Intermittent operations may occur in areas which experience very strong wind gusts. A strong wind
puts extra pressure on the gate and tracks which may in turn trigger the safety obstruction detection
system intermittently.
NOTE:
Specifications are subject to change without notice.
