8
Easy Slider - Sliding Gate Opener
Owner Installation Instructions
Product description
The ATA EasySlider sliding gate opener kit consists of one driveunit with integrated controller, two hand held
transmitters and pre-wired antenna.
Integrated controller
The integrated controller is able to control a single or dual leafgate. The antenna is pre-wired, ready to be
mounted on the fence-line. An outdoor type 240V AC power outlet is required to powerthe system. In a dual
leaf gate, the slave drive unit is connected tothe master via a five (5) wire low voltage cable. AC power is not
required by the slave unit.
Mechanical drive unit
The drive unit consists of a powerful 24V DC motor, rugged gearbox assembly and travel limits position
encoder. It also provides a key lockable manual release lever. When used with suitable cable glands the
enclosure meets the IP33 standard for ingress of dust and water.
01
fig
