background image

30

Easy Slider - Sliding Gate Opener 

Owner Installation Instructions

Once the list is displayed it can be sorted by Store 
number, ID Label or Serial Number. Use NEXT or PREV 
button to select sorting method. 

NOTE:

 When sorting by ID label or S/N, only stored 

transmitters locations are displayed. 

Step 2. Navigating the list 

1. Press UP or DOWN buttons to navigate through  

list 

(Fig. 50)

2. Press SET to display menu of available functions. 

NOTE:

 Holding a button down will step through the 

list faster. 

Selecting an operation 

Press NEXT or PREV to cycle through four menu 
options 

(Fig. 51 -54)

. Press EXIT to return to the list. 

Press SET to execute the menu’s operation. 

Code operation (location empty) 

If the code operation is selected on an empty 
transmitter location, the BASIC CODE TRANSMITTER 
PROCEDURE will be initiated with the transmitter 
being saved in the selected location. This is useful 
when managing transmitters using a scheme which ties 
the store location to the transmitter’s owner. 

Code operation (location used) 

If the code operation is selected for a location that 
already contains a transmitter, then the BASIC CODE 
TRANSMITTER PROCEDURE will be initiated and the 
new transmitter will replace the existing one. Note 
that the button functions and name of the existing 
transmitter will be transferred to the new transmitter. 
This procedure is of great convenience when replacing 
a lost transmitter. 

Delete operation 

The delete operation is used to remove a transmitter 
from memory along with the name and button function 
settings. 

Edit operation 

The edit operation displays the transmitter record 
for editing purposes. See TRANSMITTER EDIT 
PROCEDURE for details. 

Copy operation 

The copy operation is used to code multiple transmitters 
with the same button function as that of the selected 
transmitter. Once selected an abbreviated code set routine 
is initiated which repeats steps 2 & 3 of the BASIC CODE 
TRANSMITTER PROCEDURE for each transmitter to be 
coded. Coding is terminated by pressing the EXIT button. 

Exiting the list 

To exit the transmitter list simply press EXIT to return 
to the Code

Transmitter management

�� � � �

�� � � �

� �

� �

� � � �� � �

�� � � � � � �� � ��

50

fig

52

fig

53

fig

�� �� � � �
� � � �

� � �

� �

�� �� � � �
�� � � � � � � �

� �

51

fig

�� �� � � �
� � � �

� � �

� �

�� �� � � �
� �� �

� � �

� �

54

fig

Summary of Contents for Easy Slider











































Reviews: