A-18
MODULEX CONTROLLER OPERATION
OTHER ENTRIES
(General -> Service level)
Select value using Rotary Knob => value is displayed
SOFTWARE NO XXX-
XX
Software number with index
(Example: 259-04)
CASCADE MANU
(1-8; only with code
no.)
Starting different burner stages of the cascade
See GF-115, Section 6, para. 6.5 for additional startup
instructions using these sub-menu functions.
BURNER TIME (1-8)
Program Key - Burner time for all stages
BURNER START (1-8) Program Key - Burner start for all stages
LIMITER TEST (1-8)
Safety temperature limiter test with heat generator
temperature display
Start with Program Key (hold down)!
SERVICE
(only with code no.)
Input of date or operating hours for service messages
WARNING: NEVER ATTEMPT TO USE THE FOLLOWING RESET
FUNCTIONS.
RESET USER 00
DO NOT USE
RESET EXPERT 00
(only with code no.)
DO NOT USE
RESET T-PRG 00
DO NOT USE
RETURN
Exit level using Program Key
GENERAL AREA MENUS - Continued
Summary of Contents for Modulex E8
Page 1: ...Operation User Guide Modulex E8 Controller ...
Page 30: ...MODULEX CONTROLLER OPERATION 28 Figure 3 7 INSTALLATION Menu Flow Chart ...
Page 50: ......
Page 51: ...MODULEX CONTROLLER OPERATION A 1 APPENDIX A CONTROLLER MENU LISTINGS ...
