Automatic Heating Modulex E8, Operation & User’S Manual

Page: 28 / 70

MODULEX CONTROLLER OPERATION
26
Table 3-5. SERVICE Menu Listing - Continued
FUNCTION DESCRIPTION REMARKS
SENSOR TEST Sub-Menu
F11 Flow temperature heating circuit 1
or temperature multifunction 1
F12 Hot water temperature lower or temperature
multifunction 2
F13 Solid fuel boiler temperature or collector 2
or temperature multifunction 3
F14 Collector 1 temperature or
temperature multifunction 4
F15;
Light;
0-10V I
Room temperature heating circuit 2 or
measured value of the light sensor or
voltage value 0-10V input
OTHER ENTRIES
Additional items and functions in the
SERVICE Sub-Menu include the following:
SW NO XXX-XX Specifies the Software Version and Index
number currently installed in the Controller
CASCADE MANU
(1-8) Starting different burner stages of the cascade
See GF-115, Section 6, para. 6.5 for
additional startup instructions using these
sub-menu functions.
BURNER TIME (1-
8) Program Key - Burner time for all stages
BURNER START
(1-8) Program Key - Burner start for all stages
LIMITER TEST (1-
8) Safety temperature limiter test with heat
generator temperature display
Start with Program Key (hold down)!
SERVICE Input of date or operating hours for service
messages
WARNING: NEVER ATTEMPT TO USE THE FOLLOWING RESET FUNCTIONS.
RESET USER 00 DO NOT USE
RESET EXPERT
00 DO NOT USE
RESET T-PRG 00 DO NOT USE
RETURN Exit level using Program Key