Automatic Heating Modulex E8, Operation & User’S Manual

Page: 15 / 70

MODULEX CONTROLLER OPERATION
13
Table 3-2. USER Menu Listing - Continued
FUNCTION DESCRIPTION
ENTRY
RANGE
DEFAULT
HTG CIRCUIT 1 Sub-Menu
MODE Displays Timer Mode for Boiler - - - -, Standby,
Auto 1, Auto 2,
Day, Night - - - -
T-ROOM DES 1 Not Applicable
T-ROOM DES 2 Not Applicable
T-ROOM DES 3 Not Applicable
T-REDUCED Not Applicable
T-ABSENCE Not Applicable
T-LIMIT DAY Applies during day-time heating periods - - - -,
-30°C
–40°C
19°C
T-LIMIT N Applies during reduced night-time periods. - - - -,
-30°C
–40°C
10°C
HEATSLOPE Indicate number of degrees that the flow
temperature changes if the outside
temperature increases or decreases by 1°C. 0.00
– 3.00
1.20
OPTIM HEAT Not Applicable
MAX OPT-TIME Not Applicable
ECONO OPTI Not Applicable
PC-ENABLE Not Applicable
RETURN Press Program Key to exit HTG CIRCUIT 1
(or 2) sub-menu.
HTG CIRCUIT 2 Sub-Menu
Functions for HTG Circuit 2 are identical to
HTG Circuit 1 Functions listed above.
SOLAR M / F Sub-Menu (No Functions Currently In This Sub-Menu)
RETURN Pressing the Program Key with SOLAR M/F
displayed will change display to RETURN.
Press Program Key again to redisplay SOLAR
M/F. Turning the Rotary Knob clockwise will
advance thd display to the TIME PROGRAM
Menu.