40
Authorization (authentication) modes
Multi-authorization (authentication) mode
Multi-authentication mode is
switched on
by default.
It allows the authentication to be undergone by the
PIN-code, the key fob or the smartphone used as a key fob.
Deactivation of this mode is conducted by activation
another authentication mode:
• 23 pushes of the service/valet button – step-by-step
authentication;
• 24 pushes of the service button – two-step
authentication.
In order to activate this mode, push the service/valet
button 25 times.
Step‑by‑step and two‑step authentication modes
In the
step-by-step authentication mode
, two
authentication stages should be undergone before
driving:
1. The key fob or the smartphone used as a key fob
should be present within the coverage of the device.
Engine start will be permitted even in the case the
engine start prohibition mode is used in the system.
However, the IGLA ALARM will stop the engine at
the attempt to move if the PIN-code has not been
entered.
2.
In order to finish the process of authentication, the
PIN-code should be entered using the standard
buttons of the car.
This mode is disabled by default. In the case it should
be activated, press the service/valet button 23 times.
