4
The engine stop
function may be realized by use of the
analog relay (see page number 5). The analog relay
should also be used in the case the connection to the
LIN-bus is not available in the particular car.
After the IGLA ALARM system has been connected turn
on the ignition. The car will be recognized automatically,
the indication signals will begin to blink once in three
seconds.
Siren connection
IGLA ALARM informs the owner
and people near the vehicle about
alarming events using external
sound and light signals.
The following can be used as an
external sound signal:
• regular horn (depends on the
make, model and equipment of
the car)
• the siren is connected to the
orange wire IGLA ALARM
• the siren is connected to the
CONTOUR module
It is necessary to connect the siren to the orange wire
IGLA ALARM (max. 250 mA) via a relay.
Blinkers are normally used as light signals (some
other variants of external signals can be used
depending on the particular make of the car).
«Minus» siren output
!
