10
For correct work of the application «NET framework 4.5»
may be required that can be downloaded and installed
by double click of the left button of the mouse on the
file «dotNetFx45_Full_setup.exe».
The IGLA ALARM firmware update
Situate the computer with the BLED 112 USB‑dongle
as close to the device as possible in order to arrange
a stable connection.
Transfer the device to the firmware change mode:
If the device has not been connected to the car yet or the
set firmware is for another car model follow the next steps:
1. Twist the red and the gray wires together and
connect them to the «plus» of the power supplying
source.
2. Connect the black wire of the device to the «ground».
Connection of the device to the CAN‑bus at this
stage is not mandatory.
If the device has already been installed in the car:
1. Turn on the ignition without starting the engine.
2. Enter the current PIN-code or sign in with a key fob.
3. Press the accelerator
1
and holding it pressed, enter
the previously entered PIN-code once again.
4. Release the accelerator when the indication signs
start appearing once in three seconds
2
.
The firmware update and the PIN-code change is
possible in this mode.
1 The algorithm of the initial PIN-code setting is provided on page
number 27.
2 A different operative organ is used in some of the cars instead of the
accelerator (see the official website https://service.author-alarm.com/).
!
!
!