35
If connection has not been successful, flashing of
the diode will stop in 30 seconds after installation
of the power supplying element and the key fob will
be transferred in the «sleep» mode with low energy
consumption. In this case, repeat the pairing procedure
once again. The key fob leaves the «sleep» mode after
having been moved.
Check out the key fob workability after pairing it with
the device. Ensure it is displayed in the Author Config
application (available for Android only).
Adding of the key fobs with no button
This method is meant for the key fobs bought from the
official manufacturer. For adding of the key fobs, that
have already been used once and been deleted, use the
manual adding method (see page 37).
The key fobs with no buttons may be added to the
device with the radio module version 7.2 or above
(see the information on the label on the box).
1. Ensure the key fob is in the adding mode:
• insert the power supplying element to the key fob;
•
ensure the diode of the key fob is flashing with
green.
2. Retrieve the power supplying elements out of all
the key fobs (including the key fobs previously
connected to the system) and turn off the Bluetooth
device on all the phones.
3. Erase all the buttons previously recorded in the
memory of the system (see «key fobs deleting»
paragraph) and turn off the ignition.
!
