Diagnostics Operations
Diagnosis
45
Data screen.
2.
Tap the
Record
navigation button.
3.
Tap the
○
>
button on the right of
Trigger Type
bar and select
the required trigger mode.
4.
Tap the
○
>
button on the right of
Duration
bar and select a
length of time.
5.
Tap the
○
>
button on the right of
Trigger Point
bar and
select a relative percentage of a record length to be reserved
before the data recording start point.
6.
Tap
Done
to save the setting and return to the Live Data
screen; or tap
Cancel
to cancel without saving and exit
Setting.
Done Button
– confirms and saves the setting, and returns you to
the Live Data screen.
Cancel Button
– cancels the setting operation, and returns you to
the Live Data screen.
4.6.5 Active Test
The Active Test function is used to access vehicle-specific subsystem and
component tests. Available tests vary depending on the manufacturer, year,
and model, and only the available tests display in the menu.
During an active test, the tester outputs commands to the ECU in order to
drive the actuators. This test determines the integrity of the system or parts by
reading the engine ECU data, or by monitoring the operation of the actuators,
such as switching a solenoid, relay, or switch, between two operating states.
Selecting Active Test opens a menu of test options that varies by make and
model. Selecting a menu option activates the test. Follow all screen
instructions while performing tests. The content and pattern of the on-screen
information vary according to the type of test being performed. Some toggle
and variable control tests display Active Test Controls at the top of the screen
with data stream information below, or vice versa.
