Autel MaxiSys MS906BT Manual Download

Page: 94 / 147

Chapter 9

Settings Operations

Selecting Settings application opens a setup interface, on which you can adjust default
setting and view information about the MaxiSys system. There are seven options
available for the MaxiSys system settings:



Unit



Language



Printing Setting



Notification Center



About



System Settings

9.1 Operations

This section describes the operation procedures for the settings.

9.1.1 Unit

This option allows you to adjust the measurement unit for the diagnostic
system.



To adjust the unit setting

Tap the

Settings

application on the MaxiSys Job Menu.

Tap the

Unit

option on the left column.

Select the required measurement unit, Metric or English. A tick icon
will display to the right of the selected unit.

Tap the

Home

button on the top left corner to return to the MaxiSys

Job Menu. Or select another setting option for the system setup.

9.1.2 Language

This option allows you to adjust the display language for the MaxiSys system.



To adjust the language setting

Tap the

Settings

application on the MaxiSys Job Menu.

Summary of Contents for MaxiSys MS906BT




















































































































































Search results

Summary of Contents for MaxiSys MS906BT

Reviews:

Related manuals for MaxiSys MS906BT

Brands by name

Popular brands

Autel MaxiSys MS906BT, Manual

Search results

Summary of Contents for MaxiSys MS906BT

Reviews:

Related manuals for MaxiSys MS906BT

Brands by name

Popular brands