Digital Inspection Operations
Operations
132
To take pictures using the Digital Inspection application
1.
Connect the Imager Head Cable to the USB port on the top side of
the Display Tablet.
2.
If not already done, power up the Display Tablet.
3.
Tap the
Digital Inspection
application on the MaxiSys Job Menu.
The Digital Inspection application interface displays, showing a
camera operating screen. The default camera is now the Imager
head.
4.
Select the
camera
icon at the lower right corner to take photos.
5.
Focus the image to be captured in the view finder by adjusting and
properly locating the imager head cable.
6.
Tap the blue ring on the operating screen. The view finder now
shows the captured picture and auto-saves the taken photo.
7.
Tap the thumbnail image on the top right corner of the screen to
view the stored image, slide the screen left and right to view the
images one by one.
8.
Tap on the selected image and the edit toolbar instantly displays.
9.
Tap the appropriate button to
share
,
delete
, or
edit
the image.
10. Tap the
Back
or
Home
button on the Navigation bar at the bottom
of the screen to exit the Digital Inspection application.
To record a video using the Digital Inspection application
1.
Connect the Imager Head Cable to the USB port on the top side of
the Display Tablet.
2.
If not already done, power up the Display Tablet.
3.
Tap the
Digital Inspection
application on the MaxiSys Job Menu.
The Digital Inspection application interface displays, showing a
camera operating screen. The default camera is now the Imager
head.
4.
Select the
video
icon at the lower right corner to record a video.
5.
Properly locate the imager head cable to focus the inspection scene
for recording.
6.
Tap the red ring on the operating screen to start recording.
