Autel MaxiSys MS906BT Manual Download

Page: 103 / 147

VCI Manager Operations

TPMS Module Update



To update the VCI device software

Power on the Display Tablet.

Connect the VCI device to Display Tablet via USB.

Tap the

VCI Manager

application on the MaxiSys Job Menu of the

Display Tablet.

Select

Update

from the connection mode list.

The current version and the latest version of the VCI software will
be displayed after a few seconds, click

Update Now

to update the

VCI software if available.

11.3 TPMS Module Update

Before update the TPMS module in the Display Tablet, please make sure the
Display Tablet network connection is stable.

NOTE

: This option is available for MaxiSys MS906TS only.



To update the TPMS Module

Power on the Display Tablet.

Tap the

VCI Manager

application on the MaxiSys Job Menu of the

Display Tablet.

Select

TPMS

from the connection mode list.

The current version and the latest version of the TPMS firmware will
be displayed after a few seconds, click

Update Now

to update the

TPMS firmware if available.

Summary of Contents for MaxiSys MS906BT




















































































































































Search results

Summary of Contents for MaxiSys MS906BT

Reviews:

Related manuals for MaxiSys MS906BT

Brands by name

Popular brands

Autel MaxiSys MS906BT, Manual

Search results

Summary of Contents for MaxiSys MS906BT

Reviews:

Related manuals for MaxiSys MS906BT

Brands by name

Popular brands